How to Clean Your iPad Case? (A Step-by-Step Guide)

Ever look at your iPad case and think, ‘Ew, when did you last see a good scrub?’ If you nodded yes, you’re not alone. We all love our iPads – they’re practically a third arm. But let’s be honest, their cases often get overlooked in the cleaning department. 

Just like our iPads need some care when we use them in direct sunlight, their cases also need regular cleaning.

And that’s not cool, right? Our trusty iPad cases, our iPad’s best friends, deserve some TLC too! That’s why we’re here with this super useful guide on how to clean your iPad case. 

By the end of it, you’ll turn from ‘Ew’ to ‘Wow’ looking at your sparkling clean case. So, ready to give your iPad case the spa day it deserves?”

How To Clean iPad Case?

How to Clean Your iPad Case? Complete Guide!

Clean with Dishwashing Liquid

Materials Needed:

1. Dishwashing liquid

2. Water

3. Foam or sponge

4. Thin cloth or towel

5. Iron (optional)

6. Leather cleaner (alternative method)

Step 1: Prepare the Cleaning Solution

Fill a dish or a larger container with water. Alternatively, you can use water in your bathroom sink.

Add a small amount of dishwashing liquid to the water. Dishwashing liquid creates a lot of foam, which is useful for cleaning.

a person is about to prepare the cleaning solution.

Step 2: Apply foam to the iPad case

Take a foam or sponge and create a sufficient amount of foam by dipping it into soapy water. Make sure to avoid using excessive liquid on leather Smart Covers.

While you’re at it, you might also want to consider cleaning your tablet screen for a complete cleaning experience.

Apply the foam to the iPad case, focusing on the dirty areas. Gently scrub the case with your fingers, ensuring that the foam covers the entire surface. The foam will help remove dirt and stains.

Now he is applying the solution/foam to the iPad case.

Step 3: Wipe off the foam

Take a thin cloth or towel and carefully wipe off the foam from the iPad case. Make sure to wipe both the front and back of the case.

If there is excess moisture, use a dry cloth to remove it. Avoid using a blow dryer unless the case is made of leather.

now the person is wiping off the foam with towel cloth.

Step 4: Fix crumpled edges (optional)

If the edges of your iPad case are crumpled, you can use an iron to fix them. Place a cloth over the case to protect it from direct contact with the iron.

Heat the iron to a low-temperature setting and lightly press on the crumpled edges. Be careful not to apply too much heat or pressure, as it may damage the case. This method can help restore the shape of the edges.

An alternative method for leather cases:

If your iPad case is made of leather, you can use a leather cleaner instead of the dishwashing liquid. Leather cleaners are specifically designed to clean and maintain the quality of leather materials.

Apply the leather cleaner to a cloth and rub it gently on the entire case, including the edges.

Wipe off any excess cleaner using a clean cloth.

A person is wiping off excess cleaner with clean cloth.

Step 5: Assess the cleaned case

Take a moment to inspect the cleaned iPad case. It should appear significantly cleaner and free of dirt and stains.

To remove any remaining marks or spots, you may need to repeat the cleaning process or target specific areas.

A person is making sure to remove any remaining marks or spots.

Clean with Baking Soda

Materials needed:

1. Baking soda

2. Toothbrush

3. Water

4. Bleach powder (optional)

5. Cloth

Step 1: Sprinkle Baking Soda On The Case

First off, grab a spoonful of our trusty friend, baking soda. Why baking soda, you ask? Well, it’s a secret weapon against those pesky stains and odors. Give your iPad case a good sprinkle, making sure you cover every inch. It’s like a snowfall, but instead of snow, it’s baking soda, and instead of the ground, it’s your iPad case. Sounds like a winning formula, right?

Step 2: Dampen The Toothbrush

Next up, we’re going to need a toothbrush. No, not for your teeth, but for your iPad case. Dip it in water, but not too much. We want it damp, not dripping. It’s like a dance, the toothbrush is your partner, and the water is the dance floor. You don’t want to soak your partner, do you?

Step 3: Rub The Baking Soda On The Case

Now, it’s time to get down to business. Take your damp toothbrush and start rubbing the baking soda on your iPad case. Use circular motions, like you’re massaging the case.

If the stains are playing hard to get, add a pinch of bleach powder to your baking soda. It’s like adding a bit of spice to your favorite dish. Keep scrubbing until you’ve covered the whole case.

Step 4: Re-Moisten The Toothbrush

As you scrub, your toothbrush might get dry. When that happens, dip it back in the water. It’s like giving your toothbrush a little refreshment during a marathon.

Step 5: Rinse Off The Baking Soda

Once you’ve scrubbed every inch of your case, it’s time to rinse off the baking soda. Hold the case under running water and let it wash away all the dirt and grime. It’s like a mini waterfall for your iPad case.

Step 6: Wipe The Case With a Cloth

After the rinse, grab a clean cloth and gently pat the case dry. It’s like tucking your case into bed after a long day. Pay special attention to the corners and edges. You don’t want any water residue lurking around, do you?

Step 7: Air Drying

Now, let the case air dry. Find a spot away from direct sunlight and heat. It’s like giving your case a little vacation. If you’re in a hurry, place it near a fan or an open window. But remember, patience is a virtue.

Step 8: Inspect For Any Remaining Moisture

Once the case is dry, inspect it for any remaining moisture. If you find any, repeat step 7. It’s like double-checking your work before submitting it.

Step 9: Reattach The Case To Your iPad

Finally, when you’re sure the case is completely dry, reattach it to your iPad. Make sure everything aligns perfectly. It’s like putting a puzzle together. Test the buttons to ensure they’re working properly. And voila, you’ve successfully cleaned your iPad case!

Bottom Line!

With your iPad case securely attached, cleaned, and fully dry, you can once again enjoy the sleek and protected appearance it provides. 

Now that your iPad case is clean and shiny, it’s a perfect canvas for some personalization. Check out these iPad engraving ideas to make your iPad truly yours.

Whether you’re using it for work or leisure, knowing that your iPad is safeguarded against dust, scratches, and minor water exposure will give you peace of mind. 

Regular maintenance of your case is essential to keep it in top condition, so consider repeating this cleaning process periodically or as needed.