How To Charge A Tablet With A Broken Port? 7 Solutions!

If you’re like me, you rely heavily on your tablet for everything from streaming your favorite shows to connecting with friends and family. It’s always an unwelcome surprise when you find yourself unable to charge your tab due to a faulty port and you’re wondering if there’s still a way to get it powered up.

Even though the traditional way of charging a tablet with a port may be out of the question, there are still a few ways to get your tab up and running, such as using an alternate charging connector, an external battery, or a wireless charging pad.

A person using a multimeter to test the tablet with a broken charging port.

Here we will discuss the different ways that you can charge your tab when the port is broken and provide tips for making sure your device is charged safely.

7 Ways To Charge The Tablet With A Damaged Charging Port

tablet with broken charging port

Below are listed some of the ways to charge your tabs when the charging jack is damaged.

1. Use A USB-C Adapter and A USB-C Cable

To power up a tablet with a broken port, it is necessary to use a USB-C adapter and a USB-C cable.

1. Plug the USB-C cable into the USB-C adapter.

2. Plug the other end of the USB-C cable into an electrical outlet or a laptop.

3. Place the adapter over the defunct jack on the tablet.

4. Press down firmly until the adapter is connected to the tab.

5. The tab will begin charging.

It is important to note that this is an unorthodox method of charging a tablet and it may not be as efficient as charging directly from the port. It is also crucial to make sure that the adapter and cable are compatible with the device before attempting to charge it.

2. Battery Recharging

When your tablet’s charging port malfunctions, it can be difficult to charge the battery. However, it is still possible to recharge your tab with a battery. All you need is a working battery and a few simple tools.

1. You need to locate a working battery that is compatible with your device. You can use a standard AA battery or a rechargeable battery.

2. In the next step, you need a few basic tools. You will need wire cutters, a soldering iron, and some electrical tape. Once you have the supplies, you can start the process of charging your tablet.

3. Start by carefully cutting away the plastic cover over the broken charging port. Use the wire cutters to carefully remove the damaged port.

4. You will need to solder the positive and negative terminals of the battery onto the corresponding terminals on the tab.

5. Once this is done, you can use the electrical tape to secure the connections and prevent any short circuits.

6. After this you can reattach the plastic cover and plug the battery into a power source. This should allow your tablet to begin charging.

It is noted that this process may not work with all tablets. If you have any doubts, it is best to consult a professional technician before attempting to charge your device.

3. Through Wireless Chargers

Tablet is charging with Wireless Chargers

Wireless charging is a great way to charge a tablet with damaged ports. These charging pads use electromagnetic waves to transfer power to your device, so you don’t need a cable to charge your tab. 

All you need to do is place the wireless charging pad near the tab, and it will begin to charge automatically. Ensure that your charger is suitable for your device. Some of these chargers are designed specifically for certain devices.

Make sure that it is not obstructed by anything and that it is in a place that is easily accessible. Connect the charger to a power source, such as a wall outlet or USB port. The wireless charger should automatically detect your device and begin charging it. 

Keep the device on the charger until it is fully charged.

4. Charging Through A Car Charger

If you’re on the go and don’t have access to an electrical outlet, you can also charge your gadget with a car charger. Most cars come with a USB port, so all you need to do is plug the charger into the car’s USB port and then plug the USB cable into the charger and your tablet.

1. Connect the USB-C or Micro USB cable to the car charger and plug the other end into the USB port on the tablet.

2. Plug the charger into the car’s cigarette lighter or 12V outlet. 

3. Turn on the car’s engine and allow the tab to charge.

4. Check the progress of the charging and unplug the device when it is done.

6. Disconnect the charger and tab, and store the materials safely.

5. Use External Battery Pack

Powered external batteries are similar to portable power banks in that they also use USB ports to charge the device. However, they usually have larger capacities and can charge more devices at once. This makes them great for charging a tablet with a broken jack.

1. Make sure the battery pack is charged and ready to be used.

2. Connect the power bank to your tab using a USB cable.

3. Plug the cable into the USB port on the external battery.

4. Once the connection is made, the tablet should start charging. 

5. Monitor the charge level of the battery and tablet. When the device has been sufficiently charged, disconnect the cable from the tab and turn off the battery pack.

6. Disconnect the cable from the battery and store it away for future use.

6. Use Solar Chargers

A guy using Solar Chargers to charge tablet

Using a solar charger to charge a such tablet is also a good option for those who do not have access to a traditional power source. This charger works by harnessing the sun’s energy and converting it into electricity. This electricity is then stored in a rechargeable battery, which can then be used to charge the tablets.

1. Invest in a solar-powered charger that is compatible with your tablet.

2. Check that your charger is also in direct sunlight when you place your tab in direct sunlight.

3. Your tablet may require a special cable or adapter to connect to the solar charger.

4. Monitor the charging progress of your tablet. Once it has reached full charge, you can disconnect it.

5. Keep your tab cool and dry to ensure your battery will last longer and won’t overheat.

7. Repairing a USB Slot Yourself

You can fix the USB port yourself by following simple steps:

1. Unplug the device from the power

To avoid any possibility of electric shock, unplug the device from the power source before attempting any repairs.

2. Inspect the port

The USB socket should be examined to determine the extent of the damage. If it appears that only the plastic casing is cracked, it can be fixed by simply replacing it.

3. Remove the broken port

It can be removed from the device with a small flat-head screwdriver. Carefully remove the screws that secure the port in place and carefully lift it out of the device.

4. Install the new port

Once the old outlet has been removed, a new one can be installed in its place. Make sure to follow the manufacturer’s instructions for installation.

5. Connect the cables

After the installation, the cables can be reconnected to the device. It is important to follow the instructions provided by the manufacturer for proper cable attachment.

6. Test the port

Now, plug the device into a power outlet and test the input to ensure that it is functioning properly. If it appears to be working correctly, the repair is complete.

Tips For Safe Charging Of Tabs Through Non-Traditional Ways

1. Use the correct charger that is compatible with your tablet. Avoid using cheap or counterfeit chargers as they may not be safe. If you’re unsure, consult the manufacturer’s documentation.

2. Check the voltage. Make sure the voltage of the charger is correct for your device. Lower voltages can damage your device, while higher voltages can cause it to overheat. 

3. Plug the charger into a stable power source such as a wall outlet. Avoid using power strips, extension cords, or any other unstable power source.

4. Avoid extreme temperatures while charging.

5. Avoid charging your tab near water or in damp areas.

6. Don’t use a damaged charger or one with exposed wiring. 

7. Look at charging times and do not leave your tablet charging for extended periods.

8. Don’t overcharge. Unplug your device once it’s fully charged. Overcharging can reduce the life of your device’s battery.

Over To You!

Charging a tablet with a faulty port can be a challenge, but it is still possible. With the right tools and knowledge, you can charge your tabs with a USB-C to USB cable, a USB-C wall adapter, or a portable charger.

However, it is essential to keep in mind that charging your tablet with a damaged connector may be dangerous and could damage the device. Therefore, it is best to seek professional help if you cannot charge your tab yourself.